Water Based Pool Paint
Features
- 5 litres of Water Based Paint will cover approximately 40m²
- Available in Light or Mid Blue
Let’s take a closer look
What does it do?
The paint should be used at a rate of approximately forty square meters per five litres. Drying time will vary depending on atmospheric conditions, the damper the atmosphere the longer the drying time, but as a general guide leave for 24 hours before recoating and then a minimum of one week (more if possible) before filling the pool with water. Make sure that the painted surfaces are protected from excessive dampness during drying period. The paint can be applied by airless spray, brush or roller, but must not be applied in temperatures lower than 5 degrees centigrade.
A recommended dry film thickness of seventy to one hundred microns can be achieved by applying two coats.
This paint is not recommended for use on fiberglass or marbelite pools and full preparation prior to painting the surface is essential.
